Home > News > Content
Note On The Wiring Of The Three-pin IC Socket
Oct 19, 2017

Note on the wiring of the three-pin IC Socket
IC Socket brand manufacturers here to tell us that the normal environment of single-phase power products, especially mobile power IC Socket, need to use three-pin plug and the same supporting single-phase three-color IC Socket.
Three-chip IC Socket in the wiring, with the grounding of the jack to be connected, so as to protect the function, like the normal then zero line, there will be security protection, that then the need to be imported from the power supply side, rather than rely on Introduced the zero line of the IC Socket. Three-socket IC Sockets are generally designed to protect a zero-connect jack, which, when common to some of the common sense errors, connects the terminal studs at the bottom of the IC Socket to a single null line in the IC Socket This arrangement is very dangerous. If the zero line of the power supply is automatically disconnected, and the line of fire, phase line and the zero line is also relatively reversed, the IC Socket and metal parts will also have the same power supply voltage, it is likely to appear in the plug When there is electric shock problem.
Wiring errors in the event of failure, can not play a protective role, on the contrary in the very normal use, there may be an electric shock accident, so be sure to pay attention to the correct connection IC Socket.
IC Socket brand manufacturers tell us that the switch IC Socket wiring, the test pen can be used to find the line of fire, clear line and the line of fire and zero line before they can turn off the IC Socket power supply.
And then the fire line connected to one of the two holes in the switch, and then from the other hole in a 2.5MM2 insulated wire, directly to the 2.5MM2 insulated wire into the IC Socket below the three holes in the L hole, Wiring is required. And then followed by the zero line directly connected to the IC Socket 3 holes in the N hole, wiring to be connected. Finally, the ground directly to the IC Socket 3 holes in the E hole, the wiring required to be fastened. In the zero, ground wiring, can not be wrong wiring, if the switch IC Socket left and right on the ground of the fire on the wiring problem, plug in the electrical equipment will trip when the phenomenon.
In the switch IC Socket wiring, there are often the possibility of error, in addition to the implementation of strict color distinction between the provisions of the focus to use the IC Socket tester for full inspection, and also need to open the switch IC Socket for wire connection quality inspection.
For safety reasons, we must buy high-quality IC Socket products, then the IC Socket manufacturers wholesale, we should pay attention to what? Let's take a look:
First, look at the appearance of wall switch IC Socket, high-quality switch and IC Socket panel should use advanced plastic products, looks uniform material, smooth and texture; panel material with high-grade PC material, its flame retardant, insulation and resistance The impact is very good, and material stability, easy to change color. Then, depending on the internal structure, the wall switch IC Socket, usually should be used silver contacts and silver-copper composite made of conductive film, which can prevent the opening off when the arc caused by oxidation. Choose a protective door with a wall switch IC Socket products, to check the IC Socket clip tightness, force smooth is a key factor.
In considering the safety of switches and IC Sockets, their designs are also more and more consumers concerned about the choice as close to the wall color.